PARAMETER;MIN;TYP.;MAX;UNIT

Operating Frequency;;9400;;MHz Receiver IF output Frequency (Receive out);;1000;;MHz Transmit IF input Frequency (Transmit in);;1000;;MHz IF Filter Bandwidth of receiver 3dB;100;;MHz No . of Tx / Rx Channel;;1;;-- Peak Output Power / Channel;;47;;dBm Transmit Gain @ In all frequency/temps.;;47;;dB Tx input Power;;0;;dBm Second Harmonic of TX;;< -25;;dBc Pulse Width;0.1;;100;us Max Duty Cycle;;;25;% Pulse Droop;<0 .5 (For 100 us pulse width);;;dB Fall Time;;100;;ns Raise Time;;100;;ns Transmit Channel Output ON/OFF Ratio;;>110;;dBc Power Added Efficiency;;>25 %; VSWR (TX IN, ANT IN, RX OUT Ports);;1.8:1;;-- Rx Gain;;50;;dB Rx Output P1dB;;≥10;;dBm RX Input P1dB;;-15;;dBm Rx Noise Figure(0 dB Attenuation State);;3.5;4;dB Rx Noise Figure(15 dB Attenuation State);;;6;dB IF Filter Ripple;;< 1.5 dB;;Ripple in ±50Mhz around 1000Mhz Receiver Channel Image Rejection;;>30;;dBc Receiver Output in Band Spurious Rejection;;>60 (Measured for +8 dBm output power);;dBc Receiver Output Out of Band Spurious/Harmonics Rejection;;>50 (Measured for +8 dBm output power);;dBc Attenuator;;6 bits;;0~31.5 dB Attenuator Accuracy;;< 1.7 (RMS);;dB Maximum Phase Change of Receiver Channel vs Attenuator States;;<15;;31.5 dB Attenuation State Maximum Phase Change of Receiver Channel vs Attenuator States;;<5;;10 dB Attenuation State LO Frequency;;10400;;MHz Transmit Input to Receiver Output Isolation;60;70;;dBc In-band LO / spurious leakage at Rx IF;;-80;-70;dBm Max . Rx tolerable power;;≥50W;;Max duty cycle Power Supply;;28;;V Average currents;;;1.75 @ DUC25%;A Peaking currents;;;7;A Protection against open output connector;;Important, Design Guarantee;;-- Temperature reporting;;Please use TMP36 IC for temperature (analog devices);;--

PARAMETER;VALUE;UNIT

Dimensions (L x W x H);160 x 104 x 22;mm RF Connectors (Input / Output);SMA-K /SMA-K;-- DC /Control Connector;J30J – 21ZK;-- Weight;≤800;g

PARAMETER;MIN;MAX;UNIT

Operating Temp. (Housing Temp.);-40;+65;°C Humidity Range;0;100;% PA Baseplate Shutoff Temperature;+ 80;;°C

AMPLIFIER CONNECTOR TYPE:;J30J – 21ZK TRIAD CABLE PART NUMBER:;—— NUMBER;DESCRIPTION;

1, 12,2, 13;+28V 3, 14,4, 15;GND 5;SEL (TTL 5v) 16;R (TTL 5v) 6;Load (TTL 5v) 17;T (TTL 5v) 7;Data (TTL 5v) 18;CLK (TTL 5v) 8,9, 19;GND 10;Monitor voltage of Temperature 21;NC 11,20;NC