PARAMETER;MIN;TYP.;MAX;UNIT

Operation mode;DDS+PLL;;;-- Operation Frequency(3 channel);1100;;1300;MHz Maximum Set Bandwidth(Adjustable);1;;200;MHz Sweep Step (Adjustable);1;50;;KHz Sweeping Rate (Dwell time at a point) (Adjustable);4;100;;ns Output Power (Adjustable);0;;6;dBm In-band Flatness;;±2;;dB Operating Voltage;;12;;VDC Power current;;0.1;0.2;A

PARAMETER;VALUE;UNIT

Dimensions (L x W x H);120*200*30;mm RF Connectors (Output);SMA- KFD;-- Connector;JL23-14ZJW;-- Cooling;Baseplate Conduction - Optional Heatsink Available;-- Mounting;φ3-4 Thru Hole;-- Weight;≤1.5;kg

PARAMETER;MIN;MAX;UNIT

Operating Temp. (Housing Temp.);-30;+85;°C Storage Temperature;-40;+85;°C Humidity Range;0;95;% MTBF;3000;;H

AMPLIFIER CONNECTOR TYPE:;;JL23-14ZJW TRIAD CABLE PART NUMBER:;;—— PIN NUMBER;LABEL;DESCRIPTION

1-4;+VDD;+12V 5-8;GND;Ground 9;TX+;Ethernet-based user interface (Ethernet port) Interface to configure the output bandwidth, Power, ect… via software and save the setting to non-volatile memory (After power-cycling, the configured output is retained) 10;TX-;Ethernet-based user interface (Ethernet port) Interface to configure the output bandwidth, Power, ect… via software and save the setting to non-volatile memory (After power-cycling, the configured output is retained) 11;RX+;Ethernet-based user interface (Ethernet port) Interface to configure the output bandwidth, Power, ect… via software and save the setting to non-volatile memory (After power-cycling, the configured output is retained) 12;RX-;Ethernet-based user interface (Ethernet port) Interface to configure the output bandwidth, Power, ect… via software and save the setting to non-volatile memory (After power-cycling, the configured output is retained) 13-14;Remain;Remain